With summer season fully in gear, many homeowners are escaping the unbearable heat and humidity by relaxing in their backyard pools. So you only noticed that having that beautiful above ground swimming pool is going to involve a lot of effort to keep it looking nice and hopefully enjoy it. One nice appliance to have when it comes to pool maintenance is a skimmer. What is the pool skimmer?
So, what precisely is a pool skimmer? It's a functional gadget for removing small sticks and insects; many models are integrated in the pool system while others are manually operated. A mesh basket or screen filter is incorporated in the unit to trap the, bugs, small sticks and other debris and block it from making its way into the pool's filtration pump. The models that come with your pool kit is an element of a filtration system that pushes pool water into the filter and removes the bacteria, and sanitizes it before distributing it back to the pool.
A tool that moves about around the surface of the swimming pool. It uses the surface tension of the water to drag in the materials, insects, etc.; that get blown into or fall into the pool in through a small basket before it goes to the pump.
The most widely used is the static skimmer this is installed within the most private (backyard) swimming pools. These rely upon maintaining the water level of the pool to operate properly and have a limited effect using the surface tension of the water to attract floating debris.
The skimmers can be mounted after the installation of an above ground swimming pool as well. You will have to assemble your parts and arrange them out with the directions and be set cut out holes; below is a list of normal components.
You'll find that the swimming pool wall cutout size is 11 1/2" wide x 5 1/8" high. You will need to cut holes for that skimmer box and return line; we're obviously, working with a fully produced and working above ground pool.
How do i install a skimmer for a above ground pool?
At the precut wall openings, get the two parts of the return unit then be sure to have your assistant support you on the other side. You must have the fittings separated and able to connect on both sides. The return unit needs to be set up outside of the water and connected firmly.
Wear some shorts and get in the pool. Meet your partner at the precut metal wall openings. Your collaborator is outside the swimming pool facing the openings. First take the return fitting apart. There are just two pieces to the return.
Your associate will be able to cut the outline as you push the liner through the hole. At this point, you will be holding it steady as your partner finishes cutting. Push the return unit through when you are done cutting, and have the nut screwed on and tightened.
You're going to need to install the skimmer. The skimmer also is supplied in two pieces; a face plate and the box. The face-plate affixes to the wall on the inside while the box hangs on the outside of the swimming pool.
The skimmer links through the wall using several screws plus your swimming pool's wall is precut for them. Line up the skimmer plate against the precut wall opening on the inside of the pool just like you did with the return. Now, take one of the screws and poke it through the plate, liner, and wall hole.
Have your partner line up the skimmer box on the outside of the swimming pool and fasten the screw you poked through to the skimmer box. Repeat this until all of the screws are together and tighten. Your skimmer is set and the only thing left to do is cut the liner around the inside of the skimmer plate to produce an opening. This procedure is actually harder to explain than its to truly do. Remember- when doubtful- cut small. You can get a cool pool that will virtually clean itself.
